正常锯齿最适用于锯切含碳量高的小片材料，比如工具钢或铸铁。它适用于广泛的应用，包括薄横切和薄壁切面的材料。 The normal tooth is best suited for sawing of small-chip materials with high carbon content,such as tool steel or cast iron.It is suitable for a wide range of applications,including thin crosscuts and materials with thin-walled cross sections.
带有正前角的钩形齿能用于所有种类的钢材，尤其适用于长片和难以锯切的材料，例如结构钢、粹火钢以及高合金材料。 The hook tooth with a positive rake angle can be used for all kinds of steel, especially for long-chip and hard-to-cut materials,for example construction steel and hardened steel, as well as high alloy materials.
带有修正齿形的高性能钩形齿适用于锯切机械加工性能差的高合金钢，及稀有合金与Cr-Ni-Ti合金。 The special high-performance hook tooth with modified tooth geometry with low machinability high alloy steel as well as exotic alloys and Cr-Ni-Ti-alloys.
CSP-具有绝对正前角的齿是为duoflex SP尺寸范围专门开发的产品。 CW-齿形尤其适用于工具制造、加工模型、主要低合金钢的锯切、铝合金以及轮廓锯切和曲线切割。 The CSP-tooth with an extremely postive rake angel is a special development for the range of dimansion duoflex SP The CW-tooth is above all used for the manufacturing of tools,making molds, the sawing of mainly of alloy steels, aluminium-alloy, as-well-as for contour sawing and curved cutting.
